Edimax EW-7438RPn V2 Manual de usuario descargar pdf (Pagina 58)

55

DTIM Period

Set the DTIM period of wireless radio. The

default value is 3.

Data Rate

Set the wireless data transfer rate. The

default is set to auto.

N Data Rate

Set the data rate of 802.11n. The default is

set to auto.

Channel Width

Select wireless channel width (bandwidth

used by wireless signals from the device) –

the recommended value is Auto 20/40MHz.

Preamble Type

Set the wireless radio preamble type. The

default value is “Short Preamble”.

Broadcast ESSID

Enable or disable ESSID broadcast. When

enabled, the ESSID will be visible to clients as

an available Wi-Fi network. When disabled,

the ESSID will not be visible as an available

Wi-Fi network to clients – clients must

manually enter the ESSID in order to

connect. A hidden (disabled) ESSID is

typically more secure than a visible (enabled)

SSID. WPS (Wi-Fi Protected Setup) is also

disabled when SSID broadcast is disabled.

WMM

WMM (Wi-Fi Multimedia) technology can

improve the performance of certain network

applications, such as audio/video streaming,

network telephony (VoIP) and others. When

WMM is enabled, the device will prioritize

different kinds of data and give higher

priority to applications which require instant

responses for better performance.

CTS Protect

Enabling this setting will reduce the chance

of radio signal collisions between 802.11b

and 802.11g wireless access points. It’s

recommended to set this option to “Auto”.

Tx Power

Set the power output of the wireless radio.

You may not require 100% output power.

Setting a lower power output can enhance

security since potentially malicious/unknown

users in distant areas will not be able to

access your signal.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 125 126

Comentarios a estos manuales

Sin comentarios