Edimax EW-7438RPn V2 Manual de usuario descargar pdf (Pagina 115)

112

is extremely hot.

during frequent use. If you can safely place your

hand on the wireless extender, the temperature of

the device is at a normal level.

b. If you smell burning or see smoke coming from

wireless extender then disconnect the extender

immediately, as far as it is safely possible to do so.

Call your dealer of purchase for help.

My network device

can’t access the

Internet.

a. Ensure that your broadband router is fully

functional.

b. Switch off both your network device and wireless

extender and switch back on again.

c. Ensure that the wireless extender is powered on

(check the PWR LED).

d. On the browser based configuration interface home

page, check “Status” under “Wireless

Configuration”. It should be “Connected” – if it is

“Disconnected” then this means the wireless

extender is not connected to your router/access

point.

My wireless extender

has a poor signal

from my access

point/router.

The best location to place the Wi-Fi extender is one

which is an open space, roughly in the middle

between your router and the Wi-Fi dead zone, and

where the Wi-Fi extender LED displays “Excellent”

signal strength.

a. Keep the extender away from other radio devices

such as microwaves or wireless telephones.

b. Do not put the extender in the corner of a room or

under/nearby metal.

c. It is recommended to plug the extender directly

into a wall socket.

d. Ensure there are as few obstacles as possible

between the extender and the access point/router.

Can I use the same

SSID as my current

gateway router for

my Wi-Fi extender?

Yes, but it is not recommended as it will be difficult to

distinguish between two SSIDs with the same name.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 125 126

Comentarios a estos manuales

Sin comentarios

Edimax EW-7438RPn V2 Manual de usuario Pagina 115

Comentarios a estos manuales

Relacionado con productos y manuales para Puntos de acceso wlan Edimax EW-7438RPn V2