Edimax EW-7416APN V2 Manual de usuario descargar pdf (Pagina 36)

III-3. WPS Setting

WPS (Wi-Fi Protected Setup) is a simple way to establish

connections between WPS compatible devices. WPS devices

feature a WPS function which can be activated by pushing a

WPS button on the device or from within the device’s

firmware/configuration interface. When WPS is activated in

the correct manner and at the correct time for two

compatible devices, they will automatically connect.

The access point supports two types of WPS for wireless

clients: PBC (Push Button Configuration) and PIN code. For

PBC you can activate WPS on the wireless extender by

pushing the WPS/Reset button on the access point or

clicking the “Start PBC” button on the screen.

PIN code setup varies slightly in that it requires you to

manually enter a PIN code into each device via the WPS

Settings before activating WPS.

Enable WPS

Check this box to enable or disable WPS.

Wi-Fi Protected Setup Information

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 88 89

Sin comentarios

Edimax EW-7416APN V2 Manual de usuario Pagina 36