Edimax N300 Manual de usuario descargar pdf (Pagina 31)

Item Description

Fragment Threshold Set the fragment threshold. Do not modify the

default value if you don’t know what this does,

default value is 2346.

RTS Threshold Set the RTS threshold. Do not modify the default

value if you don’t know what this does, default

value is 2347.

Beacon Interval Set the beacon interval. Do not modify the default

value if you don’t know what this does, default

value is 100.

DTIM Period Configures DTIM (Delivery Traffic Indication

Message) send period. Default value is 3.

Data Rate Select the wireless data transfer speed. When you

select a value here, this extender will refuse to

establish connections with wireless clients using

other speeds.

It’s recommended you select ‘Auto’, which will

allow this Wi-Fi extender to adjust speeds

automatically.

N Data Rate Select wireless data transfer speeds by MCS0 to

MCS7. MCS stands for Modulation and Coding

Scheme, which represents different speeds when

the bandwidth is 20MHz or 40MHz.

It’s recommended to select ‘Auto’, which will

allow this Wi-Fi extender to adjust speeds

automatically.

Channel Width Select the wireless channel width, 20MHz or

40MHz. 40MHz provides better network speed

for 802.11n wireless clients.

However, if there are 802.11b/g clients

connecting to this Wi-Fi extender, it will switch to

20MHz mode automatically.

Preamble Type Set the preamble type, do not modify the default

value if you don’t know what this does, default

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

Sin comentarios

Edimax N300 Manual de usuario Pagina 31