Edimax N300 Manual de usuario descargar pdf (Pagina 43)

Management IP

Item Description

IP Address Input the IP address of the LAN / Wi-Fi port of

this Wi-Fi extender.

NOTE: Please remember this IP address. If you

forget this IP address and you didn’t use the

DHCP server function to assign IP addresses to

clients, you’ll not be able to connect to this Wi-Fi

extender, and you’ll need to clear all settings and

passwords to reset the IP address back to the

default value ‘192.168.2.2’.( Press the WPS

button and hold for 10 seconds to restore all

settings to factory defaults)

Subnet Mask Input the subnet mask of the IP address you’re

using.

Gateway Address Input the network’s gateway IP address.

Generally you can use ‘0.0.0.0’ (default value)

since this Wi-Fi extender will access the Internet

via a WAN port.

DHCP Server

Item Description

DHCP Server Choose “Enabled” to activate DHCP server

functionality, “Disabled” to deactivate it.

Default Gateway Enter the IP address of the default gateway.

Domain Name

Server IP

Enter the IP address of the domain name server.

Start IP Enter the starting IP address.

End IP Enter the end IP address.

Domain Name Enter the domain name for the device.

Lease Time Select the lease time of the DHCP server.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 57 58

Sin comentarios

Edimax N300 Manual de usuario Pagina 43