Edimax EW-7228APn Manual de usuario descargar pdf (Pagina 43)

You can click „Continue‟ button to back to previous page and continue on

other setting items, or click „Apply‟ button to restart the wireless access

point and the changes will take effect after about 30 seconds.

2-4-6 Universal Repeater

In this mode, the access point can act as a wireless repeater; it can be

Station and AP at the same time. It can use Station function to connect to

a Root AP and use AP function to service all wireless stations within its

coverage.

Here are descriptions of every setup item:

Band

Please select the wireless band you wish to use. By

selecting different band setting, you‟ll be able to

allow or deny the wireless client of a certain band.

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz

(G), only wireless clients using the wireless band

NOTE: For Repeater Mode, this access point will demodulate the

received signal, checking if this signal is noise for the operating

network then have the signal modulated and amplified again. The

output power of this mode is the same as that of WDS and normal

AP mode.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 81 82

Sin comentarios

Edimax EW-7228APn Manual de usuario Pagina 43