Edimax EW-7228APn Manual de usuario descargar pdf (Pagina 37)

both wireless access points will be connected together. You can use this

mode to connect a network to another network which is physically

isolated.

Please note that when you set your access point to this mode, it will not

accept regular wireless clients anymore.

When you select „AP Bridge-Point to Point‟, the following options will

be displayed:

Here are descriptions of every setup item:

Band

Please select the wireless band you wish to use. By

selecting different band setting, you‟ll be able to

allow or deny the wireless client of a certain band.

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz

(G), only wireless clients using the wireless band

you select (802.11b, 802.11 Draft-N, or 802.11g)

will be able to connect to this access point.

If you select 2.4GHz (B+G), then only wireless

clients using 802.11b and 802.11g band will be

able to connect to this access point.

If you want to allow 802.11b, 802.11g, and 802.11

Draft-N clients to connect to this access point,

select 2.4GHz (B+G+N).

Channel Number

Please select a channel number you wish to use.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Sin comentarios

Edimax EW-7228APn Manual de usuario Pagina 37