Edimax EdiView Manual de usuario descargar pdf (Pagina 43)

Network Type

Select “DHCP” to automatically assign an IP

address to your network camera from your

router or “Static IP” to manually set a static IP

address using the fields below. “PPPoE” is an

additional option for advanced users.

IP Address

Static IP users specify an IP address here,

which will be the IP address of your network

camera.

Subnet Mask

Enter the subnet mask of the IP address.

Gateway

Enter the gateway address of your network.

Primary DNS

Enter the IP address of your primary DNS

server.

Secondary DNS

Enter the IP address of your secondary DNS

server (optional).

HTTP Port

You can edit the HTTP port number to any

value between 1024 – 65535. The default

value is 80.

PPPoE is not recommended unless you are an advanced user.

Using PPPoE, your network camera can connect directly to your

modem/ISP without a router/access point. This may cause issues

using the EdiView II app, EdiView Finder and the web-based

management interface.

Username

Enter the PPPoE username assigned by your

ISP here.

Password

Enter the PPPoE password assigned by your

IPS here.

MTU

Enter the maximum transmission unit (MTU)

value of your network connection. This value

must be greater than 512 and less than 1492.

The default value is 1392.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 132 133

Sin comentarios

Edimax EdiView Manual de usuario Pagina 43