Edimax EdiView Manual de usuario descargar pdf (Pagina 35)

III-4. WPS (Wi-Fi Protected Setup)

The WPS button is a quick and easy method to establish a secure wireless

connection between your network camera and your wireless router/access

point.

1. Press and hold the WPS button on your wireless router/access point for

the correct length of time to activate its WPS.

Please check the instructions for your

wireless router/access point for how long

you need to hold down its WPS button to

activate WPS.

2. Within two minutes, press the WPS/Reset button on the network camera

for 2 – 5 seconds to activate WPS. The green LAN LED will flash slowly to

indicate that WPS is active.

Take care not to hold the WPS/Reset

button too long and reset your network

camera (see I-7. Reset)

3. The devices will establish a secure wireless

connection. The green LAN LED will flash

quickly to indicate a successful WPS

connection.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 132 133

Sin comentarios

Edimax EdiView Manual de usuario Pagina 35