Edimax WAP1750 Manual de usuario descargar pdf (Pagina 22)

AP Mode

IV. Browser Based Configuration Interface

In Managed AP mode some functions of the browser based

configuration interface are disabled. Please use Edimax Pro NMS

on your Controller AP to configure your Managed AP(s).

The browser-based configuration interface enables you to configure the

access point’s advanced features. The WAP1750 features a range of advanced

functions such as MAC filtering, MAC RADIUS authentication, VLAN

configurations, up to 32 SSIDs and many more. To access the browser based

configuration interface:

1. Connect a computer to your access point using an Ethernet cable.

2. Enter your access point’s IP address in the URL bar of a web browser. The

access point’s default IP address is 192.168.2.2.

3. You will be prompted for a username and password. The default

username is “admin” and the default password is “1234”, though it was

recommended that you change the password during setup (see III-2. Basic

Settings).

If you cannot remember your password, reset the access point

back to its factory default settings. Refer to I-5. Reset

4. You will arrive at the “System Information” screen shown below.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 231 232

Sin comentarios

Edimax WAP1750 Manual de usuario Pagina 22