Edimax PS-1210Un Manual de usuario descargar pdf (Pagina 64)

Lines should be indented with tabs.

Where hostname is the device name of a print server, the

ht=1 tag specifies the hardware type is Ethernet, the ha=

tag specifies the Ethernet address of a print server, which

is the Node ID located on the print server. The ha tag

must be preceded by the ht tag. The ip= tag should

correspond to the IP address you want to assign to the

print server.

For example, a print server with the following

configuration:

Node ID: 0000B4010101 (this implies Ethernet

address is 0000B4010101),

IP address: 203.66.191.12

The entry for this print server in the /etc/bootptab file

should be:

PS010101:\

:ht=1:\

:ha=0000B4010101:\

:ip=203.66.191.12:

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 158 159

Sin comentarios

Edimax PS-1210Un Manual de usuario Pagina 64