Edimax PS-3207UWg Manual de usuario descargar pdf (Pagina 126)

118

If you need the print server to automatically get an IP

from DHCP server, select “Enable Obtain TCP/IP Settings

Automatically (Use DHCP/ BOOTP)”. You also can select

“Disable Use the following TCP/IP Settings” to manually

assign “IP Address”, “Subnet Mask” and “Gateway” for the

print server.

You can enable/disable or set auto for the print

server’s DHCP server. The DHCP server is disabled by

default. If the DHCP Server is enabled or set Auto, you

have to assign a range of IP addresses here. Fill in the

“Start IP”, “Range”, “DNS”, “Subnet Mask” and “Gateway”,

and the print server will assign a unique IP for each client.

Note that when “Auto” is selected, the DHCP Server of the

print server will be enabled only when there is no other

DHCP Server within the network.

8.4.4 SMB

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 157 158

Sin comentarios

Edimax PS-3207UWg Manual de usuario Pagina 126