Edimax EW-7106PC Manual de usuario descargar pdf (Pagina 30)

Parameter Description

DTIM Period Determines the interval the Access Point will send its broadcast

traffic. Default value is 3 beacons.

Preamble Mode The preamble defines the length of the CRC block for

communication among the wireless stations. There are three mode

including Long, Short and Auto. High network traffic areas should

use the shorter preamble type. If “Auto“ mode is selected, the AP

will auto switch the preamble mode depending on the wireless

adapters.

Data Rate There are several options including Auto/1/2/5.5/11Mbps for you to

select. When the “Auto” is selected, the AP will choose the most

suitable transmission rate automatically.

Accept Authentication Type The wireless network supports two subtypes of network

authentication services: Open System and Shared Key. Under Open

System authentication, any wireless adapters can request

authentication. Under Shared Key authentication, only wirelss

adapters using a shared key (WEP Key) are allowed to request

authentication. If “Both“ is selected, the AP can adjust the

authentication type automatically.

Set Defaults

Let the setting values return to default.

3.8.3 Statistics

You can get the real time information about the packet transmission and receiving status

during wireless communication from the screen. If you want to recount the statistics value,

please click “Reset“.

1 2 ... 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Edimax EW-7106PC Manual de usuario Pagina 30