Edimax EW-7209APg Manual de usuario

Busca en linea o descarga Manual de usuario para Redes Edimax EW-7209APg. Setup EW-7206Apg and EW-7209APG as Repeater Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Edimax Technology Europe BV
Created on 21/08/2006 09:20:00
Page 1 of 2
1
To setup EW-7206ApG or EW-7209ApG as a Repeater, please do the following:
First Step: Make sure you have the latest firmware available from our website.
The AP is not configured to assign IP-addresses, therefor we need to (temporarily) assign
one manually to your networkcard. (Wired or wirelessly, for flashing firmware we advice a
wired connection to your AP)
1) Go to “Control Panel”, “Network Connections” right-click your networkcard, go to it's
Properties, select “Internet Protocol (TCP/IP)”, click on “Properties”.
Select “Use the Following IP Address”, enter 192.168.2.2 as IP-address and subnet-
mask is 255.255.255.0. (Filled in automatically) Click “OK” and “OK” to save the
setting. (This can take a while.)
2) Logon to your AP; Open Internet Explorer, and surf to 192.168.2.1
Username = “admin” and password = “1234”
Click on “Upgrade” and browse to the bin file on your computer. (Download the
latest firmware from www.edimax.eu). Wait for the upgrade and reset.
3) When done, do a hardware reset! (To reset, press and hold the reset-button at the
back of the AP for 15 seconds and power it off and back on again.)
Second Step: Change the IP address of EW-7206APg according to your router.
4) Logon to your AP; Open Internet Explorer, and surf to 192.168.2.1
Username = “admin” and password = “1234”.
Click on “System Utility”, change the IP-address into your router’s IP range, subnet
mask and default gateway is your router’s IP address. (For example, 192.168.2.50,
255.255.255.0, 192.168.2.1). You need to know what IP Address you can allocate
to your AP.
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - Page 1 of 2

Edimax Technology Europe BV Created on 21/08/2006 09:20:00 Page 1 of 2 1 To setup EW-7206ApG or EW-7209ApG as a Repeater, please do the following: F

Pagina 2

Edimax Technology Europe BV Created on 21/08/2006 09:20:00 Page 2 of 2 2 5) Click “Apply” to save the new settings. Wait for 10-15 seconds, you will

Comentarios a estos manuales

Sin comentarios